Battery Runtime Calculator: How Long a Power Station Runs

Put in its watt-hours and what you want to run. It tells you the hours — and how fast solar fills it back up.
By Jason · power & outdoors · worked against the Jackery, Bluetti and EcoFlow units we run here

How long will a power station run your gear? Take its watt-hours, keep about 85% for conversion loss, and divide by the watts you’re running. A 1,000 Wh station runs a 100 W mini-fridge roughly 8 hours. Put your numbers in below — the calculator does the sum, for one appliance or several at once.

What this calculator works out

Put in your power station’s watt-hours and the appliances you want to run. The tool returns two things: the hours it lasts, and — if you add a solar input — how long solar takes to fill it back up. Add as many appliances as you like; it totals the load and does the math.

What are you running?

Combined runtime
—
Solar recharge
—
from empty, rough
ApplianceWattsRuns about

Figures assume ~85% conversion loss — a general lithium figure, not a measurement of your unit. Your mileage varies.

Email me the deals

Runtime uses the common formula watt-hours × 0.85 ÷ load; ~85% is a general lithium conversion figure. Estimate appliance watts from the maker’s label or Energy.gov.

The runtime formula

It’s one line: hours = watt-hours × 0.85 ÷ the watts you’re running. The watt-hours are on your unit’s label. The watts come from each appliance’s label.

The 0.85 is the catch. A power station loses some energy turning stored battery power into the household current your devices use. About 85% survives that trip — a general figure for lithium units, not a measurement of any one model. So a 1,000 Wh station gives you roughly 850 usable watt-hours.

Worked out: 1,000 Wh × 0.85 ÷ a 50 W CPAP is about 17 hours. The same station on a 100 W mini-fridge is about 8 hours.

What a household runs in an outage

Four things cover most outages: a fridge, a CPAP, some lights, and a phone. Typical draws to start from — enter your own labels for a real answer:

A mini-fridge pulls around 100 W (and cycles on and off, so real runtime is longer). A CPAP is about 50 W. LED lights are a few watts each. A phone charger is around 10 W. That’s the common question answered: a 1,000 or 2,000 Wh station, and how long it holds a refrigerator.

Recharging with solar

Solar fills the station back up, slower than the wall. Rough math: watt-hours ÷ your panels’ watts, plus a margin.

Panels almost never hit their rated watts — clouds, angle and heat all take a cut — so plan for longer than the sticker suggests. Add your solar input above and the calculator gives you a ballpark.

Questions, answered

How long will my power station run my fridge?
Take the station’s watt-hours, multiply by about 0.85 for conversion loss, and divide by the fridge’s running watts. A 1,000 Wh station runs a 100 W mini-fridge roughly 8 hours; the calculator does the sum for your numbers.

Why 85%?
Lithium power stations lose some energy turning stored DC into household AC. About 85% is a common, general figure — your unit may do a little better or worse.

How long does solar take to recharge it?
Roughly the watt-hours divided by your panels’ watts, plus a margin because panels rarely hit their rated output.

Prepping Bargains - Survive the wild, save at the store. See Amazon deals.
Prepping Bargains
Logo